S5IS-shooting with Creative Zone

Taken with the photography websites of creation-Creative Zone
Shooting mode: P-Av-Tv-M
You can manually install the speed, the aperture to achieve the intent of his expression. After setting up the installation, the process is like shooting mode Auto.
Note:
-You must know the basics of correlation between the speed and the aperture.
-at low speed and with wide apertures, air will vibrate. If the same vibration warning appears on the LCD (or frame viewing), try these steps to fix it:
* Use the function IS (Image stabilizer).
* Upgrade to ISO (limited use because more susceptible to noise).
* Install Auto ISO Shift in [On].
* Use the flash.
* Use a tripod.
P-Program AE. Use Program AE mode to auto-set speed and aperture balance for the expose (exposure) of the scene photographed.
-When you can't find the right light on route parameters, speed and aperture will show up in red on the LCD (or watch the frame) when I press the shutter button halfway. Use the following way:
* Adjust The ISO.
* Install Auto ISO Shift in [On].
* Use the flash.
Tv-speed priority mode When you set the pace, the camera will automatically select the appropriate apertures to capture enough light.
Fast paced lets get started right away is the subject, the slow pace creates flow (flow) and allows shooting in the dark without flash.
1. use the keys [left, right] to select the speed and shooting.
-If the aperture value on the LCD have red, bright light or balance will lack images. Use the keys [left, right] to adjust the speed until the aperture value on the LCD are white.
-The fastest sync speed of flash attached air is 1/500 seconds. The camera will automatically reset the speed for flash from 1/500 seconds back if I put air in higher speed.

Av-aperture priority mode aperture adjusts the amount of light passing through the lens. When you set the aperture, the camera automatically select the appropriate speed to capture enough light.
-Select a low aperture value (open to aperture) allowing the fading wallpaper and create beautiful photo portrait.
-Select the aperture value is high (close to small apertures) that make up the depth of field (DOF) for the photo from the subject to the background.

1. use the keys [left, right] to select the aperture and shutter.
-If the value of the speed on the LCD have red, bright light or balance will lack images. Use the keys [left, right] to adjust aperture until the value of the speed on the LCD are white.
-Few values of aperture can not apply the zoom position.
-The fastest sync speed of flash attached air is 1/500 seconds. Thus the aperture value automatically changes to suit the flash sync speed to whatever value the Aperture has been installed before.
Talk about Safety Shift/Safety FE
Safety Shift
If you set [Safety Shift] in [On] in (Rec menu) when shooting mode the Tv or Av and press the shutter button halfway, the camera automatically changes the value of the speed and the aperture to achieve proper morning route if necessary. Functional Safety Shift does not work when you open flash.
Safety FE
If you set [Safety FE] in [On] in (Rec menu) when shooting with flash in P, Tv, Av, camera automatically changes the value of the speed and the aperture when the flash light to avoid residual am and played out.